Products Description
ISG and ISW pumps are precision-casted with HT200 casting. The characteristics are that the motor and pump are coaxial and the end cover is integrated, which makes the pump compact in structure, small in size and light in weight, stable in operation, easy to install, and can completely replace IS and BA centrifugal pumps. They can be used in industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, cooling tower, water supply, long-distance water supply, etc., cold and warm water circulation pressurization and equipment matching, and the medium temperature is greater than 80 degrees.
Pump details
|
Flow rate: |
25(mih) |
|
Pump shaft position: |
side vertical |
|
Impeller structure: |
enclosed impeller |
|
Number of impellers: |
single stage |
|
Impeller suction method: |
double suction |
|
Lift: |
32(m) |
|
Speed: |
2900 |
|
Electric power: |
4(w) |
|
Suction distance: |
4m) |
|
Exit speed: |
65(mm) |
|
Working temperature: |
80℃ |
Pump structure diagram

Working condition
1.The pump system maximum pressure is 1.6MPa.that is to say the pump suction pressure + pump head≤1 ,6MPa.(Please specify the systemworking pressure when) ordering, if pump system working pressure is greater than 1.6MPa,should be separately put forward when ordering, therefore we will use of steel materials to manufacture the over-current and connected parts of the pump.)
2.Medium:insoluble solids volume contents of no more than the volume per unit's 0.1%.particle size less than 0.2mm.(f the medium contents of small paticles, the wearesistant mechanical seals is used. So please note it when ordering.)
3.The ambient temerature does not exceed 40C, relative humidity is no more than 95%alitude does not exceed 1000m.
Main materials of single-stage single-suction centrifugal pump
|
Spare Part |
Material |
|
Shaft |
R45, 3Cr13.40Cr, 1Cr18Ni9, 1Cr18Ni9Ti |
|
Pump Case |
HT200,HT250,ZG251I,ZG 1Cr13,ZG1Cr18Ni9,Cr18Ni9Ti |
|
Impeller |
HT200,HT250,ZG2511,ZG1Cr13,ZG1Cr1 8Ni9,ZH62,ZCuSn10P1 |
|
Mechanical Seal Material (As client's demand) |
Stationary Face |
Rotary Face |
Structural Part |
Secondary Seal |
Spring |
|
1.Tungsten Carbide (WC) |
1.Tungsten Carbide (WC) |
S.S.304 |
1.Nitrile rubber (NBR) |
S.S.304 |
|
Structure of pump unit

Flange parameter table

Mechanical seal and bearing specification
|
Motor Power(KW) |
Mechanical Seal Specification |
|
0.75- 2,1.1-2, 0.75- 4 |
109-18 |
|
1.5- 2, 2.2- 2 |
109-20 |
|
3-2,4-2,5.5-2,7.5-2, |
109-25 |
|
11- 2, 15- 2,18.5-2,22- 2, |
109-35 |
|
45-2,55-2,75-2,90- 2, |
109-45 |
|
72-2,90-2,110-2,132- 2, |
109-55 |
|
Motor Frame |
Bearing Spetication |
|
80 |
6204 |
|
90 |
6205 |
|
100 |
6206 |
|
112 |
6306 |
|
132 |
6308 |
|
160 |
6309 |
|
180 |
6311 |
|
200 |
6312 |
|
225 |
6313 |
|
250,280 |
6314 |
|
315 |
6317 |
Valve and Elbow pipe equivalent straight pipe length(each)
|
Type |
Equivalent Straight Pipe Diameter Magnification |
Remark |
|
Open Valve |
12 |
Pat open double it |
|
Elbow Pipe |
25 |
|
|
Check Valve |
100 |
|
|
Foot Valve |
100 |
Part jam double it |
Note: Take 100mm pipe tor examplefoot valve equivalent straight pipe length=100mmx 100=10m, i discharge=8L ds,check the table find 100m straight pipe loss 1.3m,the 10m pipe loss -0.13m,hat is to saycone 100mm foot valve,when discharge is 8Ls,he head loss is 0. 13m.
Max discharge Limited base on specified pipeline Diameter
|
Diameter(mm) |
Max Discharge(US) |
Max Speed(m/S) |
Diameter(mm) |
Max Discharge(US) |
Max Speed(mS) |
|
25 |
1 |
2.04 |
125 |
32 |
2.44 |
|
38 |
2.5 |
1.69 |
150 |
43 |
2.45 |
|
50 |
4.17 |
2.12 |
175 |
60 |
2.49 |
|
65 |
6.67 |
2.01 |
200 |
83.3 |
2.69 |
|
75 |
10 |
2.26 |
250 |
133.3 |
2.72 |
|
100 |
18.4 |
2.33 |
300 |
192 |
2.71 |
Exceeding the limit will increase the line loss significant.
Parameter/Dimension


















