Operating Condition
| Liquid temperature | -15℃ to +90℃ |
| Flow rate range | See pump parameters |
| Maximum head | See pump parameters |
| Maximum medium density | 1350 kg/m³ |
| Ambient temperature | Up to +40℃ |
| Maximum altitude | 3000m |
| System maximum pressure | 10bar |
When the pump conveys liquids with higher specific gravity and viscosity, the shaft power will increase, so a motor matching the shaft power must be used.
Product Superiority
Customizable depth from 450-1000mm based on customer's tank depth.
All parts of the pump in contact with liquids are made of FRPP, CFRPP, PVDF materials, depending on the chemical liquid being transported.
Double-layer dry shaft seal design to prevent chemical gases from damaging motor bearings.
Special design of the impeller ensures that the pump will not be damaged even if the impeller rotates in reverse.
Suitable for various acid and alkali liquid circulation, cooling, spraying equipment, exhaust towers, wastewater treatment, and chemical tank liquid transfer.
Applied Range
The product is suitable for thin liquids without solid particles and fibers; chemical industry; pharmaceutical, pesticide, pickling, dyeing industry; paint industry; smelting, papermaking, electroplating industry; suitable for any concentration of hydrochloric acid, nitric acid, sulfuric acid, hydrofluoric acid, chloric acid, phosphoric acid, acids, bases, salt solutions, strong oxidizing agents, organic solvents, and other strongly corrosive media.
Product Model Description
| Head(m) | 13 |
| Flow rate(m³/h) | 7 |
| Inlet diameter(mm) | 50 |
