Product Introduction
Magnetic centrifugal pump (abbreviated as magnetic pump), usually by the motor, magnetic coupling and corrosion-resistant centrifugal pump. Its main feature is that the magnetic coupling is used to transmit power and has no leakage. When the motor drives the outer magnetic steel of the magnetic coupling to rotate, the magnetic field line passes through the gap and isolation sleeve, and acts on the inner magnetic steel, so that the pump rotor and the motor rotate synchronously, and the torsional refusal is transmitted without mechanical contact. At the power input end of the pump shatft, there is no dynamic seal and there is no leakage because the liquid is closed in the static isolation sleeve. The overflow parts of the pump can be made of corrosion-resistant materials such as 304, 304L, 302, 321, 316, 316L,UB6, CD4MCu, titanium alloy, and nickel-based alloy according to needs. IMC series magnetic pump is a new type of completely non-leakage and anti-corrosion pump developed by the National Joint Design Group of Magnetic Pumps. Its technical and economic indicators are comparable to those of similar products abroad at the end of 1980s. The RMC series magnetic pump type and the basic parameter accords with the TB/T7742-95 "Small Magnetic Drive Centrifugal Pump" standard request.
Operating conditions
- Conveying maximum system pressure:1.6 MPa
- Maximum temperature:100℃
- Maximum density:184x10kg/m³
- Maximum viscosity:30x10-6m/s (liquid without hard particles and fibers)
- Ifthe working pressure of the system is greater than 1.6 MPa,special design can be carried out, and the highest working pressure of the system can reach 15MPA
★ When the specific gravity and viscosity of the liquid conveyed bythe pump are large, the shaft power will rise,so a motor matching the shaftpower must be used.
Main uses
RMC series magnetic pumps are suitable for petroleum, chemical,pharmaceutical,smelting,electroplating environmental protection,food,film and television printing, water treatment,national defense and other industries.It is an ideal equipment for transporting flammable,explosive,volatile, toxic,rare and valuable liquids and various corrosion-resistant liquids.
Product model definition

Performance Parameters
|
Model |
Flow rate (m3/h) |
Head (m) |
Motor power (kW) |
Rotational speed (r/min) |
Cavitation allowance (m) |
Inlet (mm) |
Outlet (mm) |
|
RMC32-20-125 |
3.2 |
20 |
1.1 |
2900 |
2 |
32 |
20 |
|
RMC32-20-160 |
3.2 |
32 |
1.5 |
2900 |
2 |
32 |
20 |
|
RMC32-20-200 |
3.2 |
50 |
3 |
2900 |
2.5 |
32 |
20 |
|
RMC40-25-125 |
6.3 |
20 |
1.5 |
2900 |
2.5 |
40 |
25 |
|
RMC40-25-160 |
6.3 |
32 |
2.2 |
2900 |
2.5 |
40 |
25 |
|
RMC40-25-200 |
6.3 |
50 |
5.5 |
2900 |
2.5 |
40 |
25 |
|
RMC40-25-250 |
6.3 |
80 |
7.5 |
2900 |
2.5 |
40 |
25 |
|
RMC50-32-125 |
12.5 |
20 |
2.2 |
2900 |
2.5 |
50 |
32 |
|
RMC50-32-160 |
12.5 |
32 |
4 |
2900 |
2.5 |
50 |
32 |
|
RMC50-32-200 |
12.5 |
50 |
7.5 |
2900 |
2.5 |
50 |
32 |
|
RMC50-32-250 |
12.5 |
80 |
11 |
2900 |
2.5 |
50 |
32 |
|
RMC65-50-125 |
25 |
20 |
3 |
2900 |
2.5 |
65 |
50 |
|
RMC65-50-160 |
25 |
32 |
5.5 |
2900 |
2.5 |
65 |
50 |
|
RMC65-40-200 |
25 |
50 |
11 |
2900 |
2.5 |
65 |
40 |
|
RMC65-40-250 |
25 |
80 |
15 |
2900 |
2.5 |
65 |
40 |
|
RMC80-65-125 |
50 |
20 |
5.5 |
2900 |
3 |
80 |
65 |
|
RMC80-65-160 |
50 |
32 |
11 |
2900 |
3 |
80 |
65 |
|
RMC80-50-200 |
50 |
50 |
15 |
2900 |
3 |
80 |
50 |
|
RMC80-50-250 |
50 |
80 |
30 |
2900 |
3.5 |
80 |
50 |
|
RMC100-80-125 |
100 |
20 |
11 |
290c |
3.5 |
100 |
80 |
|
RMC100-80-160 |
100 |
32 |
15 |
2900 |
3.5 |
100 |
80 |
|
RMC100-65-200 |
100 |
50 |
30 |
2900 |
3.5 |
100 |
65 |
|
RMC100-65-250 |
100 |
80 |
45 |
2900 |
4 |
100 |
65 |
|
RMC125-80-160 |
160 |
32 |
30 |
2900 |
4 |
125 |
80 |
|
RMC125-100-200 |
200 |
50 |
55 |
2900 |
4.5 |
125 |
100 |






