What is the performance curve of a vertical multistage pump?
As a supplier of vertical multistage pumps, I often encounter customers who are curious about the performance curve of these pumps. Understanding the performance curve is crucial for selecting the right pump for a specific application, ensuring optimal efficiency, and predicting how the pump will operate under different conditions. In this blog post, I will explain what a vertical multistage pump performance curve is, what information it provides, and how to use it effectively.
What is a Performance Curve?
A performance curve is a graphical representation of the relationship between the flow rate (Q) and the head (H) of a pump, along with other important parameters such as power consumption (P), efficiency (η), and net positive suction head required (NPSHr). The flow rate is the volume of fluid that the pump can move per unit of time, usually measured in cubic meters per hour (m³/h) or gallons per minute (GPM). The head is the energy that the pump adds to the fluid, expressed in meters (m) or feet (ft) of fluid column.
The performance curve is typically plotted with the flow rate on the x - axis and the head on the y - axis. Other curves for power, efficiency, and NPSHr are also plotted on the same graph to provide a comprehensive view of the pump's performance.
Key Components of a Vertical Multistage Pump Performance Curve
1. Head - Flow Curve
The head - flow curve is the most important part of the performance curve. It shows how the head of the pump changes as the flow rate varies. In a vertical multistage pump, as the flow rate increases, the head generally decreases. This is because as more fluid is pushed through the pump, there is more friction and turbulence within the pump stages, resulting in a loss of energy and a reduction in the head.
The shape of the head - flow curve can vary depending on the design of the pump. Some pumps have a steep curve, which means that a small change in flow rate can cause a large change in head. Other pumps have a flatter curve, indicating that the head is more stable over a wider range of flow rates.
2. Efficiency Curve
The efficiency curve shows the efficiency of the pump at different flow rates. Efficiency is the ratio of the useful power output of the pump (hydraulic power) to the power input (shaft power). It is expressed as a percentage.


The pump operates most efficiently at a specific flow rate, known as the best efficiency point (BEP). At the BEP, the pump uses the least amount of energy to deliver a given flow rate and head. As the flow rate moves away from the BEP, the efficiency of the pump decreases. It is important to select a pump that can operate close to its BEP for most of its service life to minimize energy consumption and operating costs.
3. Power Curve
The power curve shows the power consumption of the pump at different flow rates. As the flow rate increases, the power required to drive the pump also increases. However, the relationship between power and flow rate is not linear. At low flow rates, the power consumption is relatively low, but as the flow rate approaches the maximum capacity of the pump, the power consumption can increase rapidly.
4. Net Positive Suction Head Required (NPSHr) Curve
The NPSHr curve shows the minimum net positive suction head required by the pump to prevent cavitation. Cavitation is a phenomenon that occurs when the pressure at the suction side of the pump drops below the vapor pressure of the fluid, causing the formation of vapor bubbles. These bubbles collapse when they enter the high - pressure region of the pump, causing damage to the pump impellers and reducing the pump's performance.
The NPSHr increases as the flow rate increases. It is important to ensure that the net positive suction head available (NPSHa) at the pump inlet is greater than the NPSHr to avoid cavitation.
How to Use the Performance Curve
1. Selecting the Right Pump
When selecting a vertical multistage pump for a specific application, the first step is to determine the required flow rate and head. This can be based on the system requirements, such as the volume of fluid to be transported and the height or pressure difference that the fluid needs to overcome.
Once the required flow rate and head are known, the performance curve can be used to select a pump that can meet these requirements. The operating point of the pump should be as close as possible to the BEP to ensure high efficiency.
For example, if you need a pump to deliver 50 m³/h of water at a head of 100 m, you can look at the performance curves of different pumps to find one that can provide this flow rate and head at or near its BEP.
2. System Analysis
The performance curve can also be used for system analysis. By comparing the pump performance curve with the system curve (which shows the relationship between the head required by the system and the flow rate), the operating point of the pump in the system can be determined.
The system curve is influenced by factors such as the length and diameter of the pipes, the number of fittings, and the elevation difference in the system. The intersection of the pump performance curve and the system curve is the operating point of the pump in the system.
3. Predicting Pump Performance
The performance curve can be used to predict how the pump will perform under different conditions. For example, if the system requirements change and the flow rate needs to be increased, the performance curve can be used to determine the new head and power consumption of the pump.
Related Products
If you are interested in pumps with different performance characteristics, we also offer a High Flow Circulation Pump which is designed for applications where a large volume of fluid needs to be circulated. Our Vertical Multistage Pump is suitable for high - head applications, and we also have Single - Stage Single Suction Pipeline Centrifugal Pump for less demanding applications.
Conclusion
Understanding the performance curve of a vertical multistage pump is essential for proper pump selection, system design, and efficient operation. By analyzing the head - flow, efficiency, power, and NPSHr curves, you can make informed decisions about which pump is best suited for your application.
If you are in the market for a vertical multistage pump or have any questions about pump performance, we are here to help. Our team of experts can assist you in selecting the right pump and ensuring that it operates at its best. We encourage you to contact us for further details and to start a procurement discussion.
References
- Stepanoff, A. J. (1957). Centrifugal and Axial Flow Pumps: Theory, Design, and Application. John Wiley & Sons.
- Karassik, I. J., Messina, J. P., Cooper, P. T., & Heald, C. C. (2008). Pump Handbook (4th ed.). McGraw - Hill.
- Idelchik, I. E. (2007). Handbook of Hydraulic Resistance. Begell House Inc.
