When using a fluoroplastic centrifugal pump, the following points should be noted to ensure its normal operation and extend its service life:
- Prevent idling and waterless operation: Fluoroplastic centrifugal pumps cannot be idling during use, and waterless operation is strictly prohibited to avoid damage to the internal structure of the pump.
- Control flow: The displacement should not be reduced by adjusting the suction port to avoid cavitation.
- Check for leaks: Completely prevent leakage from the stuffing box, use new stuffing when replacing the stuffing, and ensure that the mechanical seal has sufficient flushing water flow.
- Lubrication and sealing: Lubricants should not be used too much, and the tightness of the stuffing should be checked and adjusted appropriately regularly to ensure reliable sealing.
- Temperature control: If the medium temperature is too high, cooling measures should be taken for the mechanical seal to prevent deformation of the mechanical seal or cracking of the static ring.
- Regular inspection and maintenance: Periodic inspections should be carried out and operation records should be established, including maintenance measures such as operating hours, adjustment and replacement of stuffing, and addition of lubricants.
- Shutdown operation: When shutting down, cut off the power supply, drain the liquid in the pump, and rotate the impeller 180 degrees regularly to prevent the shaft from deforming until the pump is completely cooled down2.
- Installation location: When selecting the installation location, it should be convenient for the heat dissipation of the pump cover and the bearing seat to avoid heat accumulation.
- Avoid low flow operation: Fluoroplastic centrifugal pumps should not be operated continuously under conditions below 30% of the design flow. If they must be operated under such conditions, a bypass pipe should be installed at the outlet to make the flow reach or exceed the minimum value
- Pay attention to noise and vibration: Check the looseness of the anchor bolts frequently, pay attention to the vibration of the pump, and deal with any abnormal conditions in a timely manner
Following these precautions can help ensure the safe and efficient operation of fluoroplastic centrifugal pumps while extending their service life.
